Extendable Component Warning System

Light + Sound
Warning System

Dump Box, Lift Bucket & Boom

The most innovative microprocessor available to continuously monitor and alert unsafe positioning of any extendable component such as dump truck boxes, lift buckets, booms and more. Making operators acutely aware when a truck's components are retracted and they are Good to Go™.

Open Menu
Home Features Available Products What's In The Box FAQ Resources Quote

Patent Protected Software

Proprietary smart-software inside patent-protected technology. Configured to warn operators when extended components are not safety in their home position.

Hardwired Installation

Eliminates tampering and potential for accidental or deliberate disconnection. Automatically alerts if signal to components are lost for any reason.

Audible, Visual, Speed Alarms

2-stage light + sound alarms. Configured to emit pulsed and continuous signals based on vehicle speed and extendable component position.

Precision Connectivity

The most accurate and reliable readings taken directly from the vehicle diagnostic port. OEM approved connectivity. Not an intermediary device.

Before The Worst Happens
Truck Photo

Standard Features

Cross Industry Solution

Cross Industry Solution

  • dump trucks
  • roll off container trucks
  • sewer suckers
  • double boom buckets on hydro utility trucks
  • drillers and augers
  • concrete throwers having multiple extensions
  • cranes and outriggers
  • excavator buckets
  • extension ladders
  • all sizes of pup trailers
Highway Safety Code Compliant

Highway Safety Code Compliant

Advanced features guaranteed to meet Highway Safety Code (chapter C24.2) SAAQ Tipper Truck Regulations in effect September 1, 2020.

Continuous Position Monitoring

Continuous Position Monitoring

Automatic self-diagnostic check upon ignition. Constant 12 volt output connects to any internal or external warning device, including onboard GPS/AVL device.

Rhodium Contact Reed Switch

Rhodium NON-Contact Magnetic Reed Switch

Constructed of nylon-glass filled polymer, potted and sealed. Not prone to physical damage caused by dirt, ice and snow, or typical failures with other mechanical micro switches, hydraulic pressure switches, proximity sensors, or electro-optical sensors.


Inside Out Warranty

Lifetime Warranty for components inside the module.

2-year Warranty for components outside the module.

1-year Warrant for installation by DiCAN certified technicians.

In Cab Mounting

In Cab Mounting

Compact control panel enclosed in highgrade ABS plastic, requires minimal installation space inside the driver cockpit.

Momentary Mute Control

Momentary Mute Control

Limit driver annoyance while moving at reduced speed during shouldering or unloading, automatically alarms over 12 km/hr.

Customizable Settings

Customizable Settings

Configure to suit your specific needs: speed control warnings, mute time, beep frequency, light flash frequency, park brake position, output to external horn.

Sure To Fit

Sure To Fit

The most comprehensive configurations suitable for every truck make, model, year of manufacture; including pre 1993 vehicles.

Pup Trailer Accessories

Pup Trailer Accessories

Expand safety net by connecting two kits to alarm pup trailers, double booms, and multiple extensions.

Canada Flag

Made In Canada

Total quality control over manufacturing. Guarantees the use of genuine parts. Highly responsive to the need for fleet customization and programming configurations.

Available Products

Visual alarm having flash and solid red LED display
Audible alarm having pulse and continuous tones
Speed alarm connected to vehicle diagnostic port  
Integrated system connects to J1939 data bus (OEM approved)  
Stand alone, self-contained system  
Ability to broadcast to third-party GPS/AVL Telematics
Ability to connect to auxiliary onboard device ie. horn, light

Ability to connect to auxiliary dashboard indicator light
Ability to connect to 2nd extendable component ie. pup trailer, boom  
Park brake feature integration via optional park brake accessory
Ability to mute audible alarm while driving below configured speed  
Ability to mute audible alarm at any time  
Configurable light flash frequency (60-120 cycles/min) Default Preset 90/min Default Preset 90/min
Configurable beep tone frequency (60-120 cycles/min) Default Preset 90/min Default Preset 90/min
Configurable mute time (1-120 sec) Default Preset :60sec  
Adjustable mute time pre-sets (1, 2, 3 min)   Default Preset I min
Configurable road speed (1-25 km/hr) Default Preset 12km/hr  
CAN bus communication speed (250K, 500K, OBDII)  
SAAQHighway Safety Code Compliant (Chapter C24.2 in effect September 1, 2020)

U.S. Patent No.: 10,106,175   CDN Patent No.: 2,999,602

What's In The Box


DBSA-12-E - Advanced light + sound + speed
indications directly from vehicle diagnostic port





Alarm Module

In-Cab Mounting Bracket 

ITF Connection Cable (J1939 connector, wiring schematic)

Dash-mounted Red LED Indicator Light 

Dash-mounted Momentary Mute Push Button

Magnetic Switch Assembly Kit 

All Stainless-Steel Hardware

Installation Guide + Wiring Schematics


DBSA-12-B - Simple up + down indications; no road speed capabilities or 2nd Mag Switch connection.

Alarm Module

In-Cab Mounting Bracket 

Magnetic Switch Assembly Kit

All Stainless-Steel Hardware

Installation Guide + Wiring Schematics

Mag Switch
2nd Mag Switch Extension Kit
To alarm 2nd extendable component: pup trailer, articulating boom. Available for all lengths + combinations.
Park Brake
Park Brake Switch Kit
A kit of redundant connectors/cables necessary to connect to alarm module.
Momentary Mute Button
Momentary Mute Push Button
An auxiliary button that activates the alarm silencing feature.
Red LED Indicator Light
Low profile, auxiliary light dash-mounted within the operators direct line of sight.
U.S. Patent No.: 10,106,175   CDN Patent No.: 2,999,602

Frequently Asked Questions

Click Here to Visit:

SAAQ Regulations SAAQ Website SAAQ FAQ

What is the Good to Go™?
What makes Good to Go™ different than any other dump box alert/alarm in the market?
How do I know which version to choose for my fleet needs? Elite or Basic
What makes Good to Go™ tamper resistant?
What makes Good to Go™ weather resistant?
What makes Good to Go™ so accurate?
Will installing a Good to Go™ system void my truck manufacturer warranty?
Does Good to Go™ use an intermediary device to detect box position and track speed?
How many extendable components can be alarmed using ONE (1) Good to Go™ module?
Can any vehicle having an extendable component or pup trailer use the Good to Go™?
Can any industry benefit by installing a Good to Go™ warning system on their vehicles?
What are the minimum requirements I need to be SAAQ compliant?
Are all Dump Box light and sound alarms the same? What makes an alarm compliant by SAAQ standards?
Is the Good to Go™ SAAQ compliant?
What happens if I don’t have a SAAQ compliant Light and Sound Warning System installed?
What vehicles are targeted in the SAAQ Law?
When does the SAAQ law come into effect?
What do I need to know about using the Park Brake feature on my vehicle and a Good to Go™?


Download Brochure



Before the WORST happens...

Good to Go™ Warning System

U.S. Patent No.: 10,106,175   CDN Patent No.: 2,999,602

Request A Quote

Contact Information


Add Dump Truck Vehicle

Vehicle Options

Add PUP Trailer

Before The Worst Happens